Roofing Providers

The roofing contractor providers published through this provider network cover licensed and credentialed service providers operating across the United States, organized by service type, roofing system specialty, and geographic market. Each provider reflects publicly available business and licensing data structured to support informed contractor selection. The provider network spans residential and commercial roofing sectors, including repair, replacement, leak remediation, and specialty installation work. Understanding how these providers are structured — and how to use them alongside licensing and regulatory data — is essential to navigating the sector accurately.

How Currency Is Maintained

Provider Network providers in the roofing sector require ongoing verification because contractor licensing status changes with state renewal cycles. Roofing contractors are licensed at the state level, not federally, and 46 states plus the District of Columbia impose some form of contractor licensing requirement, ranging from general contractor classifications to roofing-specific trade licenses. States including Florida, California, and Texas maintain publicly searchable license databases through their respective contractor licensing boards — the Florida Department of Business and Professional Regulation (DBPR), the California Contractors State License Board (CSLB), and the Texas Department of Licensing and Regulation (TDLR) — and these databases serve as the primary verification layer for active license status.

Provider data is cross-referenced against:

1. State licensing board public records
2. Insurance certificate documentation (general liability and workers' compensation)
3. Manufacturer certification programs such as GAF Master Elite, Owens Corning Platinum Preferred, and CertainTeed SELECT ShingleMaster
4. Better Business Bureau (BBB) accreditation status
5. Local business registration and jurisdiction-level contractor permit history

Entries flagged with licensing discrepancies or lapsed insurance are removed from active display. The Roof Repair Provider Network Purpose and Scope page outlines the full editorial and verification framework applied to each entry category.

How to Use Providers Alongside Other Resources

Providers function as a structured starting point, not a standalone decision-making tool. Roofing projects above a threshold area — typically 100 square feet or more of new installation, though thresholds vary by jurisdiction — require a building permit under the International Residential Code (IRC) Section R905 and local amendments. Contractor providers do not substitute for permit verification or municipal inspection records, which are maintained by local building departments.

For storm damage claims involving insurance carriers, the carrier may require contractor credentials beyond state licensing, including insured-and-bonded status and wind mitigation certification. Wind resistance testing standards under ASTM International D7158 and D3161 govern shingle performance ratings referenced in insurance and permitting contexts. Providers should be used in parallel with insurer requirements and local code lookups.

The How to Use This Roof Repair Resource page provides structured guidance on cross-referencing contractor providers with permit portals and insurance documentation requirements.

How Providers Are Organized

Providers are segmented along two primary axes: roofing system type and service category. This two-axis structure prevents mismatches between a homeowner or property manager needing flat roof repair from reaching exclusively steep-slope residential contractors, and vice versa.

Roofing System Type Classifications:

• Steep-slope systems (slope ≥ 3:12): Asphalt shingles, wood shake, metal panels, clay and concrete tile, slate
• Low-slope systems (slope < 3:12): TPO (thermoplastic polyolefin), EPDM (ethylene propylene diene monomer), modified bitumen, built-up roofing (BUR), PVC membrane
• Specialty systems: Green roofs, solar-integrated roofing, spray polyurethane foam (SPF)

Service Category Classifications:

• Repair and patching
• Full replacement
• Leak investigation and remediation
• Maintenance and inspection contracts
• Storm damage assessment and documentation

Contractors verified under low-slope commercial categories hold different qualification profiles than residential steep-slope installers. The National Roofing Contractors Association (NRCA) and the Roofing Contractors Association of America (RCAA) maintain membership and certification data that inform these distinctions. OSHA Standard 29 CFR 1926.502 governs fall protection requirements on roofing work, and contractors operating on slopes above 4:12 are subject to specific guardrail, safety net, or personal fall arrest system requirements — a credential-relevant factor captured in applicable provider fields.

What Each Provider Covers

Each individual contractor provider within the Roof Repair Providers database is structured to deliver the data points most relevant to a service procurement decision.

A standard provider entry includes:

1. Business name and primary service address — with jurisdiction-level geo-tagging for permit district alignment
2. License number and issuing state board — linked to the relevant state database where publicly accessible
3. Insurance status — general liability minimum ($1,000,000 per occurrence is the industry standard threshold) and workers' compensation coverage confirmation
4. Roofing system specializations — classified against the steep-slope/low-slope/specialty framework above
5. Service category scope — repair, replacement, leak, maintenance, or storm documentation
6. Manufacturer certifications — tier-level designations from GAF, Owens Corning, CertainTeed, or equivalent programs
7. NRCA or trade association membership — where verified
8. Permit pull history — where jurisdiction records are publicly accessible

The contrast between a GAF Master Elite certified installer and an uncertified contractor illustrates a meaningful structural difference: Master Elite status requires documented training completion, active licensure verification by GAF, and maintained insurance — representing fewer than 2% of roofing contractors nationally according to GAF's published program parameters. Providers surface these distinctions without ranking or recommending individual contractors.

Safety credentials, particularly OSHA 10 or OSHA 30 construction industry training completion, appear in providers where contractors have provided documented verification. These credentials do not replace licensing but reflect a contractor's engagement with federally established safety training frameworks under the OSHA Outreach Training Program.

References

• 36 CFR Part 61 — Professional Qualification Standards, Electronic Code of Federal Regulations
• 2018 International Residential Code (IRC) and 2018 International Building Code (IBC)
• 2020 Georgia State Minimum Standard Building Code
• 2020 Georgia State Minimum Standard Building Code
• 2018 International Building Code as adopted by Alaska
• California Contractors State License Board (CSLB)
• ASHRAE/IECC Climate Zone Map — U.S. Department of Energy Building Energy Codes Program
• Alabama Licensing Board for General Contractors